NIGERIAN PETROLEUM DEVELOPMENT COMPANY LIMITED (NPDC) (A SUBSIDIARY OF NIGERIAN NATIONAL PETROLEUM CORPORATION) 62/64 SAPELE ROAD P.M.B. 1262 BENIN CITY, NIGERIA TENDER OPPORTUNITY: PROVISION OF WELL COMPLETION ANCILLARY SERVICES FOR NPDC OMLs 111, 65, 64, 40 & 13 ASSETS

 

  1. INTRODUCTION
    Nigerian Petroleum Development Company Limited (NPDC) has a requirement for the Provision of eighteen (18) Well Completion Ancillary Services for NPDC OML 111, 65, 64, 40 & 13 Assets. NPDC therefore invites reputable and competent companies for the provision of the under-listed services for her completion operations.
  2. SERVICES REQUIRED/SCOPE OF WORK
    The following services shall be required during the drilling and completion phases of the wells.
    1. SERVICES: Surface Well Testing Services
    TENDER NO: E&D/PED/TD/0917/0189B
    PRODUCT CODE: 3.04.14
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Surface Well Testing Services on black-oil, condensate and gas wells including but not limited to:
    • Provision of Equipment / consumables requirements and back-ups for the Surface Well Testing Services
    • Provision of competent Surface Well Testing personnel including Scan/Data Acquisition and Sand Detection Specialist
  3. SERVICES: Drill Stem Test and Tubing Conveyed Perforation (DS/TCP) Services 
    TENDER NO: E&D/PED/TD/0917/0190B
    PRODUCT CODE: 3.04.26/3.04.27
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Drill Stem Test & Tubing Conveyed Perforation (DS/TCP) Services
    • Provision of Equipment / consumables requirements and back-ups for the Drill Stem Test & Tubing Conveyed Perforation (DS/TCP) 
    • Provision of competent DST, Gauge and TCP personnel
  4. SERVICES: Completion Fluid Filtration Services
    TENDER NO: E&D/PED/TD/0917/191B
    PRODUCT CODE: 3.04.31
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Completion Fluid Filtration Services
    • Provision of Equipment / consumables requirements and back-ups for the Completion Fluid Filtration Services
    • Provision of competent personnel for Completion Fluid Filtration Services
  5. SERVICES: Wellbore Cleaning and Pumping Services
    TENDER NO: E&D/PED/TD/0917/0192B
    PRODUCT CODE: 3.04.31
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Wellbore Cleaning and Pumping Services
    • Provision of Equipment / consumables requirements and back-ups for the Wellbore Cleaning and Pumping Services
    • Provision of competent personnel for Wellbore Cleaning and Pumping Services
  6. SERVICES: Coil Tubing Services
    TENDER NO: E&D/PED/TD/0917/0193B
    PRODUCT CODE: 3.04.18
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Coil Tubing Services
    • Provision of Equipment / consumables requirements and back-ups for the Coil Tubing Services
    • Provision of competent personnel for Coil Tubing Services
  7. SERVICES: Tubing Inspection, Management and Handling Services
    TENDER NO: E&D/PED/TD/0917/0194B
    PRODUCT CODE: 3.04.09
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Tubing Inspection, Management and Handling Services
    • Provision of Equipment / consumables requirements and back-ups for Tubing Inspection, Management and Handling Services
    • Provision of competent personnel for Tubing Inspection, Management and Handling Services
  8. SERVICES: Slickline Services
    TENDER NO: E&D/PED/TD/0917/0195B
    PRODUCT CODE: 3.04.20
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Slickline Services
    • Provision of Equipment / consumables requirements and back-ups for the Slickline Services
    • Provision of competent personnel for Slickline Services
  9. SERVICES: Tubing Running Services
    TENDER NO: E&D/PED/TD/0917/0197B
    PRODUCT CODE: 3.04.04
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Tubing Running Services
    • Provision of Equipment / consumables requirements and back-ups for Tubing Running Services
    • Provision of competent personnel for Tubing Running Services
  10. SERVICES: Cased Hole Electric Wire Line Logging Services
    TENDER NO: E&D/PED/TD/0917/0198B
    PRODUCT CODE: 3.04.25/3.04.09
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Cased Hole Electric Wire Line Logging Services
    • Provision of Equipment / consumables requirements and back-ups for Cased Hole Electric Wire Line Logging Services
    • Provision of competent personnel for Cased Hole Electric Wire Line Logging Services

10.SERVICES: Permanent Downhole Gauges
TENDER NO: E&D/PED/TD/0917/0199B
PRODUCT CODE: 1.01.12
SCOPE OF WORK (Include but not limited to the understated):
• Engineering pre-job design
• Supply of Permanent Downhole Gauges, Data Retrieval and Maintenance Services
• Provision of Equipment / consumables requirements and back-ups for Installation of Permanent Downhole Gauges, Data Retrieval and Management Services
• Provision of competent personnel for deployment of Permanent Downhole Gauges, Data Retrieval and Maintenance Services

10.SERVICES: Consultant Completion Supervision Services
TENDER NO: E&D/PED/TD/0917/0206E
PRODUCT CODE: 3.02.19
SCOPE OF WORK (Include but not limited to the understated):
• Project Management and Job Planning
• Onsite Supervision of rig/wellsite Completion Operations
• Provision of Technical Support Services

  1. SERVICES: Fishing Services
    TENDER NO: E&D/PED/TD/0917/0201C
    PRODUCT CODE: 3.04.11
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Fishing Services during drilling, completion/workover operations
    • Provision of competent personnel and Engineering support required for performing the work effectively and efficiently
  2. SERVICES: Completion Fluids Engineering Services
    TENDER NO: E&D/PED/TD/0917/0200B
    PRODUCT CODE: 3.04.31 & 3.04.13
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Completion Fluids and Engineering Services
    • Provision of Equipment / consumables requirements and back-ups for Completion Fluids and Engineering Services
    • Provision of competent personnel and Engineering support required for performing the work effectively and efficiently 
  3. SERVICES: Completion Fluids Engineering Services
    TENDER NO: E&D/PED/TD/0917/0202B
    PRODUCT CODE: 3.04.19/1.01.07
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Supply of surface Wellhead Equipment and Services
    • Provision of Equipment / consumables requirements and back-ups for Wellhead Installation & Services including but are not limited to: Wellhead Lubricators, auxiliary tools, required facilities/equipment for testing of wellhead equipment, etc.
    • Provision of competent personnel and Engineering support required for performing the work effectively and efficiently 
  4. SERVICES: Gravel Pack Pumping Services
    TENDER NO: E&D/PED/TD/0917/0203B
    PRODUCT CODE: 3.04.28
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of high rate water packs, viscous slurry/gel packs, frac packs, acid stimulations, with gel and foam diverters, solvent treatment, offline well kills and under balance displacements
    • Provision of Equipment / consumables requirements for the gravel pack pumping operations
    • Consumables include but are not limited to gravel pack sand, gravel pack carrier fluid and all additives necessary to make the carrier fluid etc.
    • Provision of competent personnel for gravel pack pumping Services

16 SERVICES: Completion Equipment and Services
TENDER NO: E&D/PED/TD/0917/0204B
PRODUCT CODE: 3.01.07/3.04.17
SCOPE OF WORK (Include but not limited to the understated):
• Engineering pre-job design
• Provision of Well Completion Equipment and Services of various sizes (2-3/8”, 2-7/8”, 3-1/2”, 4-1/2”) standard and chromium services
• Provision of Equipment /tools/consumables requirements and back-ups tools, required facilities/equipment for testing of completion equipment, etc.
• Provision of competent personnel and engineering support required for performing the work effectively and efficiently 

  1. SERVICES: Laboratory PVT Analysis
    TENDER NO: E&D/PED/TD/0917/0205E
    PRODUCT CODE: 3.12.03
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Laboratory Pressure Volume and Temperature (PVT) Analysis. As a minimum the CONTRACTOR shall be responsible for Laboratory PVT Analysis of Oil and Gas samples obtained during Drillin, Completion of Workover operations. The broad categories of PVT analysis to be carried out are as follows:
    i. Black Oil Analysis
    ii. Volatile Oil Analysis
    iii. Gas Condensate Analysis
    iv. Crude Oil Assay
    v. Formation Water Analysis
    • Provision of Equipment / consumables requirements for Laboratory PVT analysis 
    • Provision of competent personnel for Laboratory Pressure Volume and Temperature (PVT) Analysis & Services
  2. SERVICES: Special Core Analysis (SCAL) Services
    TENDER NO: E&D/PED/TD/0917/0207E
    PRODUCT CODE: 3.04.10
    SCOPE OF WORK (Include but not limited to the understated):
    • Engineering pre-job design
    • Execution of Special Core Analysis (SCAL) Services
    • Provision of Equipment / consumables requirements and back-ups for Special Core Analysis (SCAL) Services
    • Provision of competent personnel for Special Core Analysis (SCAL) Services
    The fields affected are located in the following blocks: OML 111, 65, 64, 40 &13 Assets.

CONTRACT STRATEGY
The Strategy is to engage the service of a contractor to execute the services on call-off basis for a period of Two (2) years with the option of One (1) year extension. Following this advertisement, companies will be evaluated and ranked based on their performance. Contract shall be split award to two (2) most competitive bidders based on the lowest bidder’s rate. NPDC shall retain the selected company to provide the required service during the contract duration.

  1. MANDATORY REQUIREMENTS
    To be eligible for this tender exercise, interested Companies are required to be pre-qualified in the relevant Product/Services categories in NipeX Joint Qualification System (NJQS) database indicated above.
    All successfully pre-qualified suppliers in the category will receive Invitation to Tender (ITT) document for the Technical phase of the tender.
    1. To determine if you are pre-qualified: Open and access NJQS with your login details. Click on Product/Services Status tab to view your status and product codes.
    2. If you are not listed in Product/Service category and you are registered with DPR to do business, contact NipeX office at 30 Oyinkan Abayomi Street, Ikoyi, Lagos with your DPR certificate as evidence of verification and necessary update.
    3. To initiate the JQS pre-qualification process, access www.nipex-ng.com Click on services tab followed by NJQS registration.
    4. To be eligible, all tenderers’ must comply with the Nigerian Content requirements in the NipeX system.
  2. NIGERIAN CONTENT DEVELOPMENT
    As requested by the Nigerian Oil & Gas Industry Content Development Act 2010, each Contractor will be required to:
    1. Demonstrate that the entity proposed for execution of the service is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
  3. International or multinational presence company working through a Nigerian subsidiary must demonstrate that a minimum of 50% of equipment to be deployed for execution of work shall be owned by the Nigerian subsidiary by providing a list of equipment for this tender and indicating those that will be owned by the Nigerian subsidiary.
  4. Furnish details of company ownership and shareholding structure with photocopies of Forms CAC2 and CAC7.
    4. Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all Nigerians companies and personnel that would be involved in executing the work. Also provide details of Nigerians Content focal point or manger.
  5. State proposed total scope of the work to be conducted by Nigerians personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well-equipped offices and workshop.
  6. Provide detailed plan for staff training and development.
    Interested companies are to note that pursuant to NPDC (NNPC) and Federal Government Policy to provide opportunities for Nigerian contractors and the development of local expertise, all the applicants must comply fully with the NOGICD Act to give preference to Nigerian companies or foreign companies with Nigerian affiliate and local ownership, which demonstrate willingness to execute the project to the satisfaction of the Nigerian Content requirements and guidelines. Each applicants is enjoined to avail themselves of the requirements of the Nigerian Oil and Gas Industry Content Development (NOGICD) Act for full compliance.
    Nigerian Petroleum Development Company on behalf of the Joint venture partners is committed to fully comply with the requirements of the NOGICD Act. In maximizing the local content of this project, pre-qualifiers are requested to give full details of their strategy for the local content implementation in order to comply fully with the law.
    In compliance with NOGICD Act requirements for Research & Development therefore, the following should be noted:
    1) All Operators or project promoters in the Oil and Gas Industry launching service contracts or other applicable projects with completion period of 12 months and above shall provide R & D implementation arrangement with at least one applicable R&D cluster approved by the Board as part of the Operator’s Nigerian Content Plan for the project or service. The arrangement shall be in form of a Memorandum of Agreement (MOA) and indicate how the Operator will deploy the Cluster to any R&D requirements during the contract phase and the first five years of the service life of the field, facility or plant.

2) All Operators are to include in their ITT documents, a requirement that any service company bidding for such a project shall submit as part of Nigerian Content requirement, a signed MOA between it and one of the R&D Clusters relevant to the project. all service companies are required to sign an MOA with any of the research Clusters. The MOA shall indicate how the service company intends to use the relevant research Clusters during project execution to the satisfaction of the Board. The MOA shall form part of the documents to be reviewed at technical evaluation stage.

  1. CLOSING DATE
    Only companies who are pre-qualified with relevant NipeX NJQS Product/Services Codes indicated as at 18:00 hours on November 24, 2017, being the advert closing date shall be invited to submit Technical Bids.
  2. ADDITIONAL INFORMATION
    1. All costs incurred in preparing and processing NJQS prequalification and responding to this Tender Opportunity shall be to the Contractor’s own account.
    2. This advertisement shall neither be construed as any commitment on the part of OPERATOR to award any contract to any Contractor and or associated contractors, sub-contractors or agent, not shall it entitle Prequalified Contractors to make any claims whatsoever, and/or seek any indemnity for OPERATOR and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
    3. The tendering process shall be undertaken in accordance with the NNPC contracting process in compliance with Public Procurement Act 2007.
    4. NPDC will communicate only with authorized officers of the qualifying Companies at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.
    5. Please note:
    ? Notwithstanding the pre-qualification in NipeX NJQS, NPDC is neither committed nor obliged to include your company on any bid list or to award any form of contract to your company and/or associated companies, sub-contractors or agents.
    ? Only pre-qualified companies in the appropriate service/supplier Categorization shall be invited for tendering.
    ? NPDC will not enter into correspondence with any company or individual on why a company was shortlisted or not shortlisted.
    Please visit NipeX portal at www.nipex-ng.com for this advert and other information.
  3. DISCLAIMER 
    This advertisement of “Tender Opportunity” shall not be construed as a commitment on the part of NPDC/NNPC, nor shall it entitle companies to make claims whatsoever and/or seek any indemnity from NPDC/NNPC and/or any of its partners by virtue of such companies having responded to this advertisement.

Comments

comments

About Gbolagade O. Adebisi 1575 Articles
For over 25 years, (Gbola)’s focus has been on Government and Institutional Business. His involvement has ranged from the Federal, State and Local Governments as well as Donor – funded programmes and projects. [...]

Be the first to comment

Leave a Reply

Your email address will not be published.


*